Shop

Showing 13–24 of 49 results


  • 2016+ (3rd Gen) Tacoma Front Bumper Frame Support Brackets
    -Fits 2016 and up Tacoma
    -Sold as a pair, left and right side.
    -Adds extra support to the factory bumper mounting locations for extreme winching and pulling situations.
    -Made from 3/16″ P&O steel plate.
    -Direct bolt on, no welding or drilling required.
    -Easy installation.
    -Comes with all necessary mounting hardware.
    -Works with our Overland Series and Lo-Pro winch bumpers. Not guaranteed to fit with bumpers from other manufacturers.
    -Ships bare steel, powder coat finish is not available.
  • -Top of rack sits about 4″ below height of vehicle's roof.
    -Adjustable cross bars with numerous slotted holes can be added and moved front to back to accommodate multiple accessories.
    -Mounting brackets use factory t-slots on bedsides for a quick and easy installation.
    -Brackets also sit on top of bedside to help support the weight of the rack and accessories.
    -Mounting brackets have plate gussets with holes which can be used as attachment points for straps, cord or bungees.
    -1 3/4″ outside diameter tubing is standard for upright hoops. This allows for easy use of rubber quck fist clamps
    or other types of OD tube clamps to mount accessories.
    -Fits short bed and long bed Tacoma
    -Ships bare steel, powder coat finish is not available.

    Please allow up to 2 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -Fits non-integrated solenoid winches from 8k-10k (some integrated models may fit)
    -Slots in front of bumper allow for easy winch access.
    -Can be ordered with or without cut outs for Baja Designs S8 light.
    -Bumper is not guaranteed to fit different brand-Can be ordered with or without cut outs for Extreme Led Light Bars and Baja Designs Light Bars.
    -Bumper is not guaranteed to fit different brand/sizes of single row LED lights.
    -D-ring shackle points come standard.
    -Bull bar, slots in front of bumper or D-ring shackle mounts can all be used as Hi-Lift points.
    -Cutting out the center section of the original plastic bumper is required
    -Ships bare steel, powder coat finish is not available.
    -Weighs 75lbs
    -Works with TRD PRO Skid Plate

    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -Top of bed bars sit 10″ above bedsides.
    -Bed bars can be adjusted front to back to accommodate spacing requirements for different accessories.
    -Mounting brackets use factory t-slots on bedsides for a quick and easy installation.
    -Brackets also sit on top of bedside to help support the weight of the rack and accessories.
    -Multiple 3/8″ slotted holes on upright plates make it easy to mount accessories to the sides of the bed bars.
    -1 3/4″ outside diameter tubing is standard for crossbars. This allows for easy use of rubber quck fist clamps
    or other types of OD tube clamps to mount accessories.
    -Fits short bed and long bed Tacoma
    -Ships bare steel, powder coat finish is not available.

    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • The 2016+ Tacoma (3rd Gen) Overland Series Front Bumper is a direct replacement (no cutting of the stock bumper) Bolt On, Full Size Front Bumper.

    If you have fender flares they will need to be trimmed where the new bumper meets the edge of fenders.

    -Fits non-integrated solenoid winches from 8k-10k (some integrated models may fit)
    -Slots in front of bumper allow for easy winch access.
    -Can be ordered with or without cut outs for Extreme Led Light Bars and Baja Designs Light Bars.
    -Bumper is not guaranteed to fit different brand/sizes of single row LED lights.
    -Can be ordered with brackets to mount original fog lights or Baja Designs Squadron LED lights.
    -D-ring shackle points come standard.
    -Slots in front of bumper or D-ring shackle mounts can be used as Hi-Lift points.
    -Ships bare steel, powder coat finish is not available.
    -120lbs without hoops, 130lbs with hoops.

    Please allow up to 8 weeks production time
    Ships to the FedEx freight hub nearest the customers residential address unless a commercial address is provided in which case product can be sent directly to the commercial address.
    This product can be shipped directly to a residence for an added freight charge of $90.00.
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.


  • Ships to the FedEx freight hub nearest the customers residential address unless a commercial address is provided in which case product can be sent directly to the commercial address.
    This product can be shipped directly to a residence for an added freight charge of $90.00.

     

  • Ships to the FedEx freight hub nearest the customers residential address unless a commercial address is provided in which case product can be sent directly to the commercial address.
    This product can be shipped directly to a residence for an added freight charge of $90.00.


  • Fits Access cab long bed, double cab short bed and double cab long bed.
    100% Bolt-on application for easy installation. Drilling additional holes is recommended to use them as a hi lift jack point on 2017+ models.
    Optional drilling can be done along bottom side of frame rail on each side for Extreme duty purposes. Hardware is provided for the extra attachment points.
    No cutting or welding required.
    All hardware included for install.
    Main slider rail is made from 3×2 rectangle tube providing a much larger surface to slide on where protection is needed most.
    Removable step plates make painting easier and allow for multiple different coating options.
    Welded on step plates are not currently an option
    Screws are zinc plated steel, Torx, pan head, 10-24 self threading screws.
    DOM tubing options available for increased strength and dent resistance
    Ships Bare Steel
    Tacoma DCSB sliders- 75lbs each
    Tacoma DCLB sliders- 90lbs each
    Must call for shipping quote if product needs to be delivered to a residential location.
    Please allow up to 8 weeks production time
    Ships to the FedEx freight hub nearest the customers residential address unless a commercial address is provided in which case product can be sent directly to the commercial address.
    This product can be shipped directly to a residence for an added freight charge of $90.00.
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -Fits 03-05 4runner.
    -06-09 4runner version will be available soon.
    -Cutting of the original plastic bumper cover is required to install the bumper.
    -Comes with all mounting brackets and hardware needed for install.
    -Product ships bare steel, we do not offer powder coating at this time.
    -Product will be shipped through FedEx ground home delivery or to a commercial address if one is provided.
    -Fits non-integrated solenoid winches from 8k-10k (some integrated models may fit)
    -Cutting of the center plastic portion of the factory bumper cover is required to install the bumper.
    -Weighs 75lbs.
    -Can be ordered with or without cut outs for Extreme Led Light Bars and Baja Designs Light Bars.
    -Bumper is not guaranteed to fit different brand/sizes of single row LED lights.

    -Can be ordered with or without bullbar.
    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -Not compatible with X-REAS suspension components.
    -Fits v6 models only!
    -Fits 03-09 4runner.
    -Bolt on design with minimal drilling required.
    -Can be ordered with or without step plates.
    -Dimple died step plates give traction for standing and clean out easily when driving in mud or snow
    -If sliders are ordered without step pads, the holes for the step pad mounting screws will not come pre-drilled into the slider tubes.
    -Step pads are attached with zinc coated steel 10-24 thread cutting screws.
    -Frame mounting plates and gussets are made from 3/16″ P&O plate which is CNC cut and bent for optimum strength and fitment to the frame rail of the 4runner.
    -Rock slider main tube is 3″x2″ rectangle tube for a large surface area which offers the most protection in the industry.
    -All tube parts are .120 wall thickness
    -DOM tubing options available for increased strength and dent resistance
    -Main slider support legs are welded in at a 45 degree rotation to help prevent the slider from getting hung up on sharp rocks
    -All mounting hardware is grade 10.9 and included with the purchase
    -All sliders ship bare steel, powder coat finish is not available.
    Please allow up to 8 weeks production time
    Ships to the FedEx freight hub nearest the customers residential address unless a commercial address is provided in which case product can be sent directly to the commercial address.
    This product can be shipped directly to a residence for an added freight charge of $90.00.
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -Fits 06-09 4Runner.
    -Cutting of the original plastic bumper cover is required to install the bumper.
    -Comes with all mounting brackets and hardware needed for install.
    -Product ships bare steel, we do not offer powder coating at this time.
    -Product will be shipped through FedEx ground home delivery or to a commercial address if one is provided.
    -Fits non-integrated solenoid winches from 8k-10k (some integrated models may fit)
    -Cutting of the center plastic portion of the factory bumper cover is required to install the bumper.
    -Weighs 75lbs
    -Can be ordered with or without cut outs for Extreme Led Light Bars and Baja Designs Light Bars.
    -Bumper is not guaranteed to fit different brand/sizes of single row LED lights.

    -Can be ordered with or without bull bar.
    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -100% bolt on design
    -CNC plasma cut parts
    -Made from 3/16″ P&O steel plate
    -All mounting hardware included
    -Easy installation
    -Archways cut into sides of skid plate to allow drainage
    -Solid plate bottom for best strength and protection
    -62 lbs
    -Ships bare steel, powder coat finish is not available.

    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.

Showing 13–24 of 49 results