Shop

Showing 1–12 of 34 results


  • -Fits 07-14 FJ Cruiser.
    -Easy bolt on design.
    -Can be ordered with or without step pads.
    -Dimple died step plates give traction for standing and clean out easily when driving in mud or snow
    -If sliders are ordered without step pads, the holes for the step pad mounting screws will not come pre-drilled into the slider tubes.
    -Step pads are attached with zinc coated steel 10-24 thread cutting screws.
    -Frame mounting plates and gussets are made from 3/16″ P&O plate which is CNC cut and bent for optimum strength and fitment to the frame rail of the FJ Cruiser.
    -Rock slider main tube is 3″x2″ rectangle tube for a large surface area which offers the most protection in the industry.
    -All tube parts are .120 wall thickness
    -Main slider support legs are welded in at a 45 degree rotation to help prevent the slider from getting hung up on sharp rocks
    -All mounting hardware is grade 10.9 and included with the purchase
    -All sliders ship bare steel, powder coat finish is not available.
    -DOM tubing options available for increased strength and dent resistance
    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -This bracket kit allows you to attach a Rigid 10″ single row LED light into the hood scoop of your 4Runner. The scoop on the 4Runner is all show and is non functional as far as the engine is concerned. We saw an opportunity to put that scoop to good use!
    -No mounting hardware necessary, bracket attaches to scoop mounting studs on the underside of the hood.
    -Bracket is laser cut and press brake formed from 14ga steel.
    -Comes coated with textured black powder coat.
    -Installation is quite easy and only takes about an hour.
    -Kit can be purchased as the bracket only or with your beam pattern choice of Rigid 10″ SR light.

     

  • -This bracket kit allows you to attach a Rigid 10″ single row LED light into the hood scoop of your Tacoma. The scoop on the Tacoma is all show and is non functional as far as the engine is concerned. We saw an opportunity to put that scoop to good use!
    -No mounting hardware necessary, bracket attaches to scoop mounting studs on the underside of the hood.
    -Bracket is laser cut and press brake formed from 14ga steel.
    -Comes coated with textured black powder coat.
    -Installation is quite easy and only takes about an hour.
    -Kit can be purchased as the bracket only or with your beam pattern choice of Rigid 10″ SR light.

     

     

  • Fits Access cab long bed, double cab short bed and double cab long bed.
    100% Bolt-on application for easy installation.
    Optional drilling can be done along bottom side of frame rail on each side for Extreme duty purposes. Hardware is provided for the extra attachment points.
    No cutting or welding required.
    All hardware included for install.
    Main slider rail is made from 3×2 rectangle tube providing a much larger surface to slide on where protection is needed most.
    Removable step plates make painting easier and allow for multiple different coating options.
    DOM tubing options available for increased strength and dent resistance
    Ships Bare Steel
    Tacoma DCSB sliders- 75lbs each
    Tacoma DCLB sliders- 90lbs each
    Must call for shipping quote if product needs to be delivered to a residential location.
    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -Top of rack sits about 4″ below height of vehicle’s roof.
    -Adjustable cross bars with numerous slotted holes can be added and moved front to back to accommodate multiple accessories.
    -Mounting brackets use factory t-slots on bedsides for a quick and easy installation.
    -Brackets also sit on top of bedside to help support the weight of the rack and accessories.
    -Mounting brackets have plate gussets with holes which can be used as attachment points for straps, cord or bungees.
    -1 3/4″ outside diameter tubing is standard for upright hoops. This allows for easy use of rubber quck fist clamps
    or other types of OD tube clamps to mount accessories.
    -Fits short bed and long bed Tacoma

    (photo is of 3rd gen, bed rack can be used on both 2nd gen and 3rd gen Tacomas)

    Please allow up to 2 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -Top of bed bars sit 10″ above bedsides.
    -Bed bars can be adjusted front to back to accommodate spacing requirements for different accessories.
    -Mounting brackets use factory t-slots on bedsides for a quick and easy installation.
    -Brackets also sit on top of bedside to help support the weight of the rack and accessories.
    -Multiple 3/8″ slotted holes on upright plates make it easy to mount accessories to the sides of the bed bars.
    -1 3/4″ outside diameter tubing is standard for crossbars. This allows for easy use of rubber quck fist clamps
    or other types of OD tube clamps to mount accessories.
    -Fits short bed and long bed Tacoma
    -Ships Bare Steel

    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • 2010-2013 4Runner Bolt on Rock Sliders
    -100% bolt on design!
    -No drilling or welding required!
    -All tube parts are .120 wall thickness
    -Frame mounting plates and gussets are .188 thickness
    -Main slider support legs are welded in at a 45 degree rotation to help prevent the slider from getting hung up on sharp rocks
    -All mounting hardware is grade 10.9 and included with the purchase
    -Dimple died step plates give traction for standing and clean out easily when driving in mud or snow
    -Removable step plates make painting easier and allow for multiple different coating options.
    -Welded on step plates are not currently an option
    -Screws are zinc plated steel, Torx, pan head, 10-24 self threading screws.
    -DOM tubing options available for increased strength and dent resistance
    -Ships Bare Steel
    -Sliders with step plates weigh 65 lbs each
    -Sliders without step plates weigh 60 lbs each

    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
     
  • -Bumper fits ’12-15′ Tacoma.
    -Fits non-integrated solenoid winches from 8k-10k (some integrated models may fit)
    -Slots in front of bumper allow for easy winch access.
    -Can be ordered with or without cut outs for Extreme Led Light Bars and Baja Designs Light Bars.
    -Bumper is not guaranteed to fit different brand/sizes of single row LED lights.
    -D-ring shackle points come standard.
    -Trimming of the middle portion of the plastic bumper cover is required for installation.
    -Bumper weighs 75lbs.
    -Ships Bare steel.
    -Ships with FedEx directly to home or business.
    -Ships Bare Steel
    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -Can be ordered with or without cut outs for Extreme Led Light Bars and Baja Designs Light Bars.
    -Bumper is not guaranteed to fit different brand/sizes of single row LED lights.
    -CNC cut and press brake bent from 3/16″ P&O steel.
    -Fits all ’14 and up 4Runner’s except the Limited model.
    -Comes with all mounting brackets and hardware needed for install.
    -Product ships bare steel, we do not offer powder coating at this time.
    -Product will be shipped through FedEx ground home delivery or to a commercial address if one is provided.
    -Fits non-integrated solenoid winches from 8k-10k (some integrated models may fit)
    -Cutting of the center plastic portion of the factory bumper cover is required to install the bumper.
    -Weighs 75lbs
    -Works with TRD Pro Skid Plate
    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • 14+ 4Runner Bolt on Rock Sliders
    -100% bolt on design!
    -No drilling or welding required!
    -All tube parts are .120 wall thickness
    -Frame mounting plates and gussets are .188 thickness
    -Main slider support legs are welded in at a 45 degree rotation to help prevent the slider from getting hung up on sharp rocks
    -All mounting hardware is grade 10.9 and included with the purchase
    -Dimple died step plates give traction for standing and clean out easily when driving in mud or snow
    -Removable step plates make painting easier and allow for multiple different coating options.
    -Welded on step plates are not currently an option
    -Screws are zinc plated steel, Torx, pan head, 10-24 self threading screws.
    -DOM tubing options available for increased strength and dent resistance
    -Ships Bare Steel
    -Sliders with step plates weigh 65 lbs each
    -Sliders without step plates weigh 60 lbs each

    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • 2016+ (3rd Gen) Tacoma Front Bumper Frame Support Brackets
    -Fits 2016 and up Tacoma
    -Sold as a pair, left and right side.
    -Adds extra support to the factory bumper mounting locations for extreme winching and pulling situations.
    -Made from 3/16″ P&O steel plate.
    -Direct bolt on, no welding or drilling required.
    -Easy installation.
    -Comes with all necessary mounting hardware.
    -Works with our Overland Series and Lo-Pro winch bumpers. Not guaranteed to fit with bumpers from other manufacturers.
    -Shipped bare steel.
  • -Top of rack sits about 4″ below height of vehicle’s roof.
    -Adjustable cross bars with numerous slotted holes can be added and moved front to back to accommodate multiple accessories.
    -Mounting brackets use factory t-slots on bedsides for a quick and easy installation.
    -Brackets also sit on top of bedside to help support the weight of the rack and accessories.
    -Mounting brackets have plate gussets with holes which can be used as attachment points for straps, cord or bungees.
    -1 3/4″ outside diameter tubing is standard for upright hoops. This allows for easy use of rubber quck fist clamps
    or other types of OD tube clamps to mount accessories.
    -Fits short bed and long bed Tacoma
    -Ships Bare Steel

    Please allow up to 2 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.

Showing 1–12 of 34 results