2012-2015 Tacomas

Showing all 6 results


  • Fits Access cab long bed, double cab short bed and double cab long bed.
    100% Bolt-on application for easy installation.
    Optional drilling can be done along bottom side of frame rail on each side for Extreme duty purposes. Hardware is provided for the extra attachment points.
    No cutting or welding required.
    All hardware included for install.
    Main slider rail is made from 3×2 rectangle tube providing a much larger surface to slide on where protection is needed most.
    Removable step plates make painting easier and allow for multiple different coating options.
    DOM tubing options available for increased strength and dent resistance
    Ships bare steel, powder coat finish is not available.

    Tacoma DCSB sliders- 75lbs each
    Tacoma DCLB sliders- 90lbs each

    Must call for shipping quote if product needs to be delivered to a residential location.
    Please allow up to 8 weeks production time
    Ships to the FedEx freight hub nearest the customers residential address unless a commercial address is provided in which case product can be sent directly to the commercial address.
    This product can be shipped directly to a residence for an added freight charge of $90.00.
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -Top of rack sits about 4″ below height of vehicle's roof.
    -Adjustable cross bars with numerous slotted holes can be added and moved front to back to accommodate multiple accessories.
    -Mounting brackets use factory t-slots on bedsides for a quick and easy installation.
    -Brackets also sit on top of bedside to help support the weight of the rack and accessories.
    -Mounting brackets have plate gussets with holes which can be used as attachment points for straps, cord or bungees.
    -1 3/4″ outside diameter tubing is standard for upright hoops. This allows for easy use of rubber quck fist clamps
    or other types of OD tube clamps to mount accessories.
    -Fits short bed and long bed Tacoma
    -Ships bare steel, powder coat finish is not available.

    (photo is of 3rd gen, bed rack can be used on both 2nd gen and 3rd gen Tacomas)

    Please allow up to 2 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -Top of bed bars sit 10″ above bedsides.
    -Bed bars can be adjusted front to back to accommodate spacing requirements for different accessories.
    -Mounting brackets use factory t-slots on bedsides for a quick and easy installation.
    -Brackets also sit on top of bedside to help support the weight of the rack and accessories.
    -Multiple 3/8″ slotted holes on upright plates make it easy to mount accessories to the sides of the bed bars.
    -1 3/4″ outside diameter tubing is standard for crossbars. This allows for easy use of rubber quck fist clamps
    or other types of OD tube clamps to mount accessories.
    -Fits short bed and long bed Tacoma
    -Ships bare steel, powder coat finish is not available.

    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • -Bumper fits '12-15' Tacoma.
    -Fits non-integrated solenoid winches from 8k-10k (some integrated models may fit)
    -Slots in front of bumper allow for easy winch access.
    -Can be ordered with or without cut outs for Extreme Led Light Bars and Baja Designs Light Bars.
    -Bumper is not guaranteed to fit different brand/sizes of single row LED lights.
    -D-ring shackle points come standard.
    -Trimming of the middle portion of the plastic bumper cover is required for installation.
    -Bumper weighs 75lbs.
    -Ships bare steel, powder coat finish is not available.
    -Ships with FedEx directly to home or business.
    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.
  • Made from 14 Gauge Steel.

    Uses a lockable hasp & welded on hinges.

    Weighs about 35 pounds.

    Design with multiple mounting hole locations.

    Mounting holes are square cut to use carriage head bolts from inside to provide a smooth surface for the jerry cans to sit.

    Sold with mounting hardware.

    Ships Bare Steel

  • Works on 05+ Tacoma bed rails

    -Bed bars can be adjusted front to back to accommodate spacing requirements for different accessories.
    -Mounting brackets use factory t-slots on bedsides for a quick and easy installation.
    -Brackets also sit on top of bedside to help support the weight of the rack and accessories.
    -Multiple 3/8″ slotted holes on upright plates make it easy to mount accessories to the sides of the bed bars.
    -1 3/4″ outside diameter tubing is standard for crossbars. This allows for easy use of rubber quck fist clamps
    or other types of OD tube clamps to mount accessories.
    -Fits short bed and long bed Tacoma
    -Ships bare steel, powder coat finish is not available.

    Please allow up to 8 weeks production time
    Flat rate shipping costs do not apply to AK and HI, or countries outside the USA, please email for a shipping quote for orders outside the U.S. and to AK and HI.

Showing all 6 results